| A: |
If you are using the RCA connections: Run the red, white and yellow
connects from the satellite receiver to the VCR line inputs. Then run the
line outputs to the TV video 1 input. Select LINE IN on your VCR and video
1 on your TV. If your are using coaxial cable: Run the coax from the TV
set out of the satellite receiver to the antenna in of the VCR. Then run
the VCR out to the TV set coax in. Put the switch on the back of the VCR
and the VCR's channel to 3 or 4. You must also put the switch on the back
of the TV and the TV's channel to 3 or 4.You can combine the RCA out of
the receiver to the VCR and the use coax out from the VCR to the TV. Be
sure to put the VCR in the LINE IN mode and the TV on channel 3 or 4. You
will have to refer to your VCR and/or your TV owners manual for help on
selecting the LINE/AUX INPUTS. |
